Equipment

Casagrande C6

Casagrande C6 is a light anchoring and drilled pile rig. The physical measurements of the machine allow for working in confined spaces. The mast is designed for a six-metre-tall rig but it can also be shortened for elements of three metres in order to fit into low spaces.

• Weight 14 tons
• Casing drilling capacity 114-406 mm
• Rock hole capacity 90-380 mm
• Drilling angles
  – Sideways 90º
  – Forwards 45º
  – Downwards 15º

Klemm KR807

Klemm KR 807 is an average-sized drilling rig for piling and anchoring in different kinds of terrains thanks to its oscillation. The maximum height of elements is ten metres.

• Weight 24 tons
• Casing drilling capacity 114-508 mm
• Rock hole capacity 90-480 mm
• Drilling angles
  – Sideways 90º
  – Forwards 45º
  – Downwards 15º

Bauer RG15T

Bauer RG15T is a piling machine equipped with a telescopic mast and can be used also in relatively low spaces. The machine is thin and the 90º rotation of the bar enables drilling to the sides of the carriage in confined spaces, for example on the streets. The compact size and the ease of transportation allow for cost-effective mobilisation.

• Weight 60 tons
• Casing drilling capacity 114-813 mm
• Rock hole capacity 90-700 mm
• Drilling angles
  – Forwards 30º
  – Inclination 4º
  – Downwards 4º

Enteco PM 1000

Enteco is at its best with long piles because it is capable of handling 27-metre-tall elements. There is no need for splicing on most construction sites and therefore when piling in water we are able to avoid the welding problems of splicing. The lift force of the machine enables large-sized holes as well as deep piles.

• Weight 80 tons
• Casing drilling capacity 140- 1320mm
• Rock hole capacity 1300 mm
• Drilling angles
  – Sideways inclination 5º
  – Forwards 20º
  – Downwards 5º
• Lift force 83 tons
• Auxiliary winch 20 tons
• Feeding force 33 tons (needed for big holes to rock)

Enteco PM1000 S (6/2016)

Enteco PM1000S is a more versatile version of the PM1000 machine already in use. The inclination angle has been improved for example by a sliding counterweight and by adding frontal inclination support to the machine. Sotkamon Porapaalu itself has designed the versatile jaw package that even better secures the straightness of a sheet pile wall and so on.

• Weight 88 tons
• Casing drilling capacity 273- 1540mm
• Rock hole capacity 1300 mm
• Drilling angles
  – Sideways inclination ±10º
  – Forwards 45º
  – Downwards 16º
• Lift force 93 tons
• Auxiliary winch 20 tons
• Feeding force 33 tons (needed for big holes to rock)